Cloudera Enterprise 5.15.x | Other versions

Troubleshooting TLS/SSL Issues in Cloudera Manager

To diagnose and resolve issues related to TLS/SSL configuration, verify configuration tasks appropriate for the cluster by verifying the steps in How to Configure TLS for Cloudera Manager.

After checking your settings and finding no obvious misconfiguration, try some of the troubleshooting steps below.

Continue reading:

Test Connectivity with OpenSSL

From the host that has connectivity issues, run openssl as shown below. You can also check that the certificate used by the host is recognized by a trusted CA during the TLS/SSL negotiation.

To check the connection:

$ openssl s_client -connect [host.fqdn.name]:[port]

For example:

$ openssl s_client -connect test1.sec.cloudera.com:7183

A return code 0 means openssl was able to follow trust server chain of trust through its library of trusted public CAs.

For certificates signed by your organization's internal CA or self-signed certificates, you may need to add the certificate to the truststore using the openssl command. Use the -CAfile option to specify the path to the root CA so openssl can verify the self-signed or internal-CA-signed certificate as follows:

$ openssl s_client -connect test1.sec.cloudera.com:7183 -CAfile \
/opt/cloudera/security/CAcerts/RootCA.pem
Only the Root CA certificate is needed to establish trust for this test. The result from the command is successful when you see the return code 0 as follows: 
...
 Verify return code: 0 (ok)
---

By default, Cloudera Manager Server writes logs to the /etc/cloudera-scm-server/cloudera-scm-server.log file on startup. Successful server start-up using the certificate looks similar to the following log example:

2014-10-06 21:33:47,515 INFO WebServerImpl:org.mortbay.log: jetty-6.1.26.cloudera.2
2014-10-06 21:33:47,572 INFO WebServerImpl:org.mortbay.log: Started SslSelectChannelConnector@0.0.0.0:7183
2014-10-06 21:33:47,573 INFO WebServerImpl:org.mortbay.log: Started SelectChannelConnector@0.0.0.0:7180
2014-10-06 21:33:47,573 INFO WebServerImpl:com.cloudera.server.cmf.WebServerImpl: Started Jetty server.

Upload Diagnostic Bundles to Cloudera Support

By default, Cloudera Manager uploads diagnostic bundles over HTTPS to the Cloudera Support server at cops.cloudera.com. However, the upload can fail if the Cloudera Manager truststore cannot verify the authenticity of the Cloudera Support server certificate, and that verification process can fail due to Cloudera Manager truststore configuration issues.

To ensure the Cloudera Manager Server truststore contains the public CAs needed to verify Cloudera Support's certificate, you can explicitly establish trust by importing Cloudera Support's certificate into Cloudera Manager's truststore.

  Note: Cloudera Support servers use certificates signed by a commercial CA, so this step is typically not needed, unless the default truststore has been altered. Before downloading or adding any certificates, test the connection and verify that the certificate is the source of the connection issue.

Importing Cloudera Support's Certificate into the Cloudera Manager Server Truststore

To obtain Cloudera's public key certificate from the Cloudera Support server:

$ openssl s_client -connect cops.cloudera.com:443 | openssl x509 -text -out /path/to/cloudera-cert.pem

To import this certificate into the Cloudera Manager truststore (use paths for your own system):

$ keytool -import -keystore /path/to/cm/truststore.jks -file /path/to/cloudera-cert.pem

After importing the certificate, confirm that Cloudera Manager is configured for this truststore file, as detailed in Configuring Cloudera Manager Truststore Properties.

  Note: Alternatively, you can use the default Java truststore for your Cloudera Manager cluster deployment, as described in Configuring TLS Encryption for Cloudera Manager.

Configuring Cloudera Manager Truststore Properties

After installing the Cloudera Support server certificate into the Cloudera Manager truststore, you must configure Cloudera Manager to use the truststore, as follows:

  1. Log into the Cloudera Manager Admin Console.
  2. Select Administration > Settings.
  3. Click the Security category.
  4. Enter the path to the truststore and the password (if necessary):
    Setting Description
    Cloudera Manager TLS/SSL Certificate Trust Store File Enter the complete Cloudera Manager Server host filesystem path to the truststore (the trust .jks). Cloudera Manager Server invokes JVM with -Djavax.net.ssl.trustStore to access the specified truststore.
    Cloudera Manager TLS/SSL Certificate Trust Store Password Specify the password (if there is one) for the truststore file. Password is not required to access the truststore, so you can typically leave this field blank. Cloudera Manager Server invokes JVM with -Djavax.net.ssl.trustStore.password if this field has an entry.
  5. Click Save Changes to save the settings.
  Note: See Oracle's JSSE Reference Guide for more information about the JSSE trust mechanism.
Page generated May 18, 2018.